Bending tool for marching lyre
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The bending device is specially designed for a marching lyre to create precise bends up to an angle of 90°
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
The bending device is specially designed for a marching lyre to create precise bends up to an angle of 90°. It features a mobile clamping jaw guided by screws to hold and form the lyre accurately. Clamp the bending device firmly into a vise before use. The mobile clamping jaw features an integrated hole. You can optionally insert a metal rod/bar into this hole to reduce the force required for bending. Up to this point, the device has been successfully operated without using the extension rod.
Part list:
printed parts | quantity: 1 set
cylinder head screw M4x35 | quantity: 2
hexagon nut M4 | quantity: 2
cylinder head screw M4x45 (for clamping jaw guide) | quantity: 2
Print instruction:
material: PETG
supports: partial required
layer height: 0.2mm or 0.3mm
nozzle diameter: 0.4mm or 0.6mm
brim: not required
enclosure: not required
Assembly instruction:
Refer to the reference image to see how the printed parts, guiding screws, and nuts are assembled.