GOAL V18 KIK Speed Loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep all the fiddly bits together
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Objects: there are 3 speed loaders, you need to print all 3 – each one is custom fit to the left, center, or right bible (left and right are from the perspective of looking down the lock's keyway), and labeled as such.
Lock Format: you need to have the “AD” (KIK) format V18 for this tool to work
Print Settings: due to the fine object geometry and minimal margin for error, I strongly recommend tuning your printer's nozzle-temperature / retraction distance, and drying your filament to prevent stringing. Strings will prevent the pins from sliding down into the loader correctly!
Layer Height: 0.15mm is fine, 0.10mm is probably better as there's less printer artifacts for falling pins to get hung up on.
Supports: none
Brim: recommended
Orientation: must be printed vertically (with text upside-down)
Gutting notes: it is possible to use the speed loader with the springs, however you have to be extremely careful seating the loader on the top of the bible as to not compress any springs, otherwise they're going to go into orbit. It's also worth noting that the springs are materially narrower than the pins, and will not be contained well by the loader if you flip, drop, or otherwise do gymnastics.