Modular Magnetic Dovetail Organizer for Campervans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular, interlocking storage system with a dovetail rail and magnetic connections, perfect for vanlife.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a highly practical, modular storage system designed originally for campervans, but equally perfect for home use (kitchens, workshops, garages, or desks)—anywhere you want to keep your space perfectly organized.
The system utilizes a screw-mounted dovetail rail as its foundation. To make it easy to print on standard build plates, the rail is split into 3 separate parts. Individual boxes, holders, and spacers slide onto this track, ensuring they stay securely in place and don't tip over.
To prevent items from shifting horizontally, all parts feature slots for pressed-in neodymium magnets underneath, connecting the components into a solid chain. The entire system is neatly locked at the open end by a custom campervan-shaped stop block, while the other side leans against a wall. The front face of the end-rail features a hexagonal recess for an M5 nut, allowing the campervan stop block to be firmly secured in place using a single M5x10mm screw.
Bill of Materials (BOM)
To fully assemble this setup, you will need:
* Printed Parts: parts of dovetail rail base, various containers/holders, spacers, and the campervan end-stop.
* Fasteners:
* Wood screws for mounting the rails to your shelf or wall.
* 1x M5x10mm screw + 1x M5 nut (for locking the end-stop to the rail).
* Neodymium Magnets (Round):
* 5x5 mm – Required for the main compartments and holders.
* 6x2 mm, 5x3 mm, or 10x1 mm – Depending on which thickness/version of spacers you decide to print.
Assembly Instructions
1. Mounting the Rail: Align the 3 parts of the dovetail rail onto your shelf or panel. Secure them firmly by screwing them down through the pre-designed counter-sunk mounting holes.
2. Preparing the End-Rail Lock: Insert one M5 nut into the hexagonal recess on the front face of the end rail.
3. Installing the Magnets: Press the round neodymiums into the bottom slots of your printed holders and spacers. You can secure them with a drop of superglue if needed.
* Crucial Note: Pay close attention to the magnet polarity! Make sure they are oriented so that adjacent boxes and spacers attract each other.
4. Slide in the Modules: Slide your tissue box, phone holders, or storage bins onto the dovetail track in your preferred layout, placing spacers between them to achieve the perfect fit.
5. Lock It Up: Slide the campervan-shaped end stop onto the end of the rail and tighten it using the M5x10mm screw into the prepared M5 nut. This prevents the modules from sliding out.
Recommended Print Settings
* Material: PETG or ASA/ABS is recommended if used in a van (PLA can warp in warm vehicle interiors during summer). For home use, standard PLA works flawlessly.