1 / 2
1/4" Female Flare to 1/4" NPT Adapter — zdjęcie 1
1 / 2

1/4" Female Flare to 1/4" NPT Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D‑printed adapter fitting with 1/4" female flare and 1/4" NPT female thread for connecting a vacuum gauge to a pump.

Ocena
0 / 5
Polubienia
2
Pobrania
26
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a 3D‑printed adapter that converts a 1/4 inch female flare connection to a 1/4 inch NPT male thread. I designed it to connect a vacuum gauge directly to a vacuum pump for quick testing and diagnostics. The geometry is optimized for clean thread engagement and airtight sealing when printed with the recommended settings.

Printing Instructions

  • Layer height: 0.10 mm

  • Print speed: Low / ~50%

  • Infill: 100%

  • Perimeters: 4

  • Material: Use a strong, non‑brittle filament (e.g., PETG, ABS, or Nylon) for best thread durability.

  • Orientation: Print vertically with the NPT thread facing upward for the cleanest thread definition.

Tagi