Volvo Upper torque mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stiffer bushing for upper torque mount. Volvo P2 chassis
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
You can easily change tolerances to your liking in the fcstd file with freecad.
Replacement bushing for Volvo 2001-2007.
The "half bushing" labelled "ABS" is for printing with hard materials to make a solid bushing and the TPU variant is the whole bushing. There is a recess in the middle, the TPU bushing can be squeesed through, but if done from ABS or other hard plastic then two parts are needed.
I recommend using around 6 perimeters and top/bottom layers for 0.4mm nozzle, to get thicker walls all around.
I used contact cement to glue the TPU and aluminium parts together, though I don't know if that is even necessary.
This is modelled for the old style aluminium housing.
Used in Volvo V70, V70XC, S60 FWD and AWD variants.