Volvo Upper torque mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stiffer bushing for upper torque mount. Volvo P2 chassis
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
You can easily change tolerances to your liking in the fcstd file with freecad.
Replacement bushing for Volvo 2001-2007.
The "half bushing" labelled "ABS" is for printing with hard materials to make a solid bushing and the TPU variant is the whole bushing. There is a recess in the middle, the TPU bushing can be squeesed through, but if done from ABS or other hard plastic then two parts are needed.
I recommend using around 6 perimeters and top/bottom layers for 0.4mm nozzle, to get thicker walls all around.
I used contact cement to glue the TPU and aluminium parts together, though I don't know if that is even necessary.
This is modelled for the old style aluminium housing.
Used in Volvo V70, V70XC, S60 FWD and AWD variants.