Counting matching models…
Enhanced Z rod grease contact bushing caps for the Elegoo Centauri Carbon. These grease cap bushings feature easy application port reciprocals that interface with the stock grease tube originally included with the Centauri Carbon. The…
The PolyMaker cardboard spools are great except for the friction. These spools were straining my printer and the filament always looked so tight between the spool and extruder. Some designs use bearings, but this seems like overkill and…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Please see https://www.printables.com/model/970292 for the updated and much superior dual durometer design After testing numerous printable door bushings, I found most to be unsatisfactory. They either didn't fit properly, required…
My printer came with resonance on the X-axis, and I was instructed to perform cleaning. With this print, it's possible to easily remove the bushing without damaging the axis or the bushing. The usage is simple, after disassembling the…
I recommend 4 top and bottom layers, 3 walls, 30% infill.
Printed in PLA using just standard print settings. I have these numbered according to MEC's bushing sizes, but because everybody's printer prints differently, the actual hole size may differ. You could either adjust your hole horizontal…
I made this model to fix a broken transmission cable bushing on my 2012 GMC Sierra 2500 so that is the only vehicle I can confirm that it works on. I printed mine in PLA with 100% infill and it is working so far, not sure how long it will…
This is a set of router bushings for the Dewalt DWE618 series router. It is also compatible with Porter Cable, Makita or other routers with a 1-3/16" diameter center hole sub-base. The sizes in this set correspond to the ones found in the…
There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…
The bushing for the "Reality Space Pi". The outer diameter of the PTFE pipe is 4 mm. PETG 0.16mm Infill 15% Without support The part has a short printing time for layers, for the best result, I recommend setting the movement speed as low…
Meet The Rockhopper Make both yourself and your workflow at least 300% cooler with the Rockhopper, a durable, totally printable, ultra refined balisong utility knife that takes standard Stanley style blades. Those boxes and packages will…
This is an easily printable bearing (more like a bushing) with the size and shape of a standard 6801 ball bearing. It has two separate pieces that when printed are captured together but can still rotate. This works for a stand-in while…
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
This is fully flippable balisong knife with bushing and zen pinless design. Weight of printed parts - cca 40 grams, with aditional wight in handles 50 grams. Lenght of whole opened knife is 257mm and closed 145mm. needed parts: blade - 1x…
This is a remix of the Tracksaw Guide plate/adapter for Makita Trim Router by @JohnMartin . This is still a work-in-progress, further fine tuning tolerances. In this remix, I made the fit of the grooves for the track saw guide rail a bit…
These bushings have been designed to enhance the shifting feel of VW manual transmission vehicles, allowing for more precise and crispier feeling shifts. This is a remix of Alberhasky_Designs ( Volkswagen MK7 GTI Shifter Bushings ) I have…
I created a Vespa rack hold down clip and Vespa rack bushing. The purpose of the clip is to hold a rear or front rack in the down position but it can also lock it in the up position, and so the clip can be stored effectively on the rack…
EN: PTFE Bushing for Table IKEA LACK This model will help you safely pass all five tubes through the IKEA LACK hollow table for your MMU upgrade. Even if the enclosed nuts have a sufficient margin of tolerance, I recommend cutting the…
Retaining clip for DieselGeek's amazing first gear getter bushing. Under heavy use, the bushing may fall out due to its friction fit. This 3D printed plastic clip slides over the bushing and holds everything securely in place. You can…
Cable Retention Bushing / Gland for USB cables, for example from arcade sets from Aliexpress. Lock tab is 8 x 8.5 x 1.6 mm. Cable is 4 mm. For holes 18 mm or 22 mm. I printed a layer of 0.16 mm.
Major issue that comes up frequently in later model Australian Ford territory and falcons is the degradation of the bushing or grommet around the transmission selector arm. These will fall apart at the most inconvenient time possible -…
Redesign of the die box that comes with all Lee loading dies so that you can leave the Hornady LNL bushings on the dies in storage (original Lee box was too small and lid would not snap shut). Should be good for all caliber dies as their…
Miata Solid Door Bushing. Will solve your door rattle issues. Expect to notice an increase in stiffness. ABS or PETG recommended. I printed it in ASA with 3 perimeters and 15% infill. You can use more. No issues more than a year later.
I had a wobble on my rear z rod. I made this little bushing to fix this issue. I printed 4 of it in different heights for variation to adjust the gap between the z rod and the top bearing (2x 0.6mm, 1x 1mm & 1x 2mm) Print in ABS or at…
General Pressing in the subframe bushings (e.g. 3507923, 3507924) into Volvo P80/P2 subframes is challenging, because they sit very tight, have to be oriented correctly and when pressing on the rubber “crown” or the inside part of the…
See update history at the bottom of this description. NOTE - These bushings are designed to keep the anti-vibration feet from falling off of the printer when moving it. For reasons explained elsewhere, they weren't designed to take a lot…
Wasn't fully satisfied with how the other single piece "Ultimate" bushings performed; The 2 piece design solves every issue with door bushings, so they're longer lasting and have a tighter, more solid fit. They have the same adjustability…
EDIT: Added a tiny MR126 bearing - 26th October 2017 Added a 605 bearing - 11th January 2018 Added 606, 623 & 695 - 16th January 2018 Added 625 (incl. Fusion360 file) - 27th February 2018 Added 6003, 6204 - 19th February 2023 Added custom…
10mm Screw and Nut with a tight Lead-Thru-Hole for 4mm PTFE-Tubes
A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.
These buhing are designed to fit to spring base shape, in such way that when tightening there is no deformation Print Settings Notes: Layer Thickness 0.1mm Speed 5mm/s Category: 3D Printer Parts
spare part for mercedes vito 638
This is a trip-lever handle bushing and nut for many Kohler toilet models. It is reverse threaded (lefty tighty, righty loosey) as is the original part. The stock nut should fit this replacement bushing, so only print the nut if you need…
This is a quick design I drew up in Fusion 360 for my R33 build as old ones were blown out
If you've got a Ford truck with rattling doors, it's likely you need new door striker bushings but you can't buy them without the full bolt assembly - seems like overkill. Took no time to model and print this up and presto! No more…
This base was designed for to replace the standard square plastic base found on many generic trim routers, and in the case, specifically the Ryobi RTR400S and RTR300 and generic trim routers. It will allow the fitting of a range of common…
Bmw E30\E28 - wiper arm bushing (for passenger's side on LHD, and driver's side on RHD). OEM number: 61 61 1 370 387 Perfectly fits on its place. Fusion360 source-file (*.f3d) attached. ---------- Update [04.09.24]: shape updated, now it…
UPDATE 10/14/2026: I made some changes to the NPT library, so the relevant files were updated accordingly. ============================================================================ I wrote an SCAD tool for generating pipe threads that…
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…
I designed these replacement bushings for one of the gear linkage rods of the golf mk4 since you can buy only rod + bushings. In my case the rod it's still almost new except for some dirt, so I decided to make the bushings on my own. I…
This openscad script lets you create bushings for tubes.
The Ender3 V3 KE used to have two screws in the front that would hold down the linear rods in the base housing. Recently, there was a design change and Creality eliminated those screws (they were also too short). Now, on some production…
These bushings can easily crack or become damaged due to extensive use over time. This model is an easy replacement. The model is the fairly common 18/20mm Ø. The ones in the pictures are printed using Esun PLA+, with the regular 0.2…
This bushing prevents the bowdentube from being pulled into the dryer box when filament is being pulled by the extruder. Printed in TPU.
I've seen stuff like this for sale online but didn't want to wait for them so I took the time to reverse engineer and test fit. I did 100% infill ASA and included my orca slicer project files for an Ender 3 V3 Ke. PETG would work though…
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
This is a subframe bushing insert I modeled for the P2 and P80 chassis Volvo's. It is inspired by the IPD Subframe Bushing inserts (linked below). I bought a spare bushing and created my own design as shipping their parts to Canada was…
This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.
I converted my monoblock AC to two hose operation, for this i needed a quick disconnect adapter to mount on my plastic window insert that already houses the exhaust hose of the AC unit. This works beautifully.
BMW F10 Differential Bushing Insert. Print at 100% infill, I used TPU 95a durometer but can also use PA-CF or any other hard material. This is inserted into the bushing to stiffen it.
Shifter bushings for Honda Acty HA4. -Ball cup -Shifter assembly bushings -Big bushings -Small bushings Printed in PETG, 100% walls. Make sure your filament is dry before printing the ball cup. If it breaks when pushing it on the socket…
Sie können es als Platzhalter, Ersatzteil oder zum Konstruieren verwenden
I suggest print theses models in TPU 95A material.
I slightly modified the bearing, I made a little chamfer on the bottom and on the top to make it much easier to use it straight away rather then remove the edge on the bottom. I didnt want to have the chamfer too big becasue I want to use…
Hello! Here is a MX5 door bushing I designed.
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
These door bushings are an upgrade from the OEM door bushings that came on your Honda Pioneer UTV. The door bushings will fit all 1000 (2016-2025) and 700 (2014-2025) models! There are two bushings for each door. Recommended materials:…
I made this so I could pass through the power supply of my heat pump into my technic box without the need to cut off the power plug, which would void the warranty of the heat pump. The cable bushing requires a ø40mm hole to be drilled and…
This is a remix of the gear-mounting bolt for the wonderful yarn winder model posted by BGDglider . The original model worked well for me with one exception: each screw that holds the drive and middle gears in place…
Modeled to be as big as possible. might give issues with door fitment. I advice ABS or PETG or something less brittle than PLA. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20%…
I was building the car for one of my daughters and lost a few of these bushings, so I CADed it up real quick, and printed it in PETG. It fits perfectly, and prints in around ~10min on my Ender3 S1. Good luck Dads!
A replacement sleeve for an Ergotron monitor arm. Should fit knock-off models (like Amazon Basics) with a 34.5mm or so hinge pin. Probably want to print in PETG so it has similar flex and slickness to the originals.
I recently bought new bushings for my Subaru, and before I put them in, I modeled them in CAD, I haven't tested them, Just modeled them. Therefore, Print at your own risk. Update: Tested out the shifter joint bushings and made some edits.…
I wanted to make an easy-to-use case for suspension-bushings -also called "pills"- for my Xray XB4 and XB8. As Team Xray uses these same components in other (offroad) cars, the boxes are also suited for the XB2 and the XT2 It helps to…
Replacements for lost or broken nylon cymbal stand bushings on Pearl 900 Series-compatible stands. Modeled closely on the originals, with a few design changes for 3D printing. They work the same way and accept the original screw. Fits:…
Print two, carefully slice off any seam on the inside edge, and clip onto the spools. This allows the cardboard spools to feed out with significantly less friction.
I was getting ready to assemble the wonderful Pastamatic spool winder and figured it'd be nice to have a bushing to use with my arbor press to seat the 608 skate bearings, so I whacked one up in TinkerCAD. I imagine it could be used for…
Just a copy of the Scubapro Tool needed to insert the piston bushing when servicing a Mk20 or Mk25 (EVO) first stage. I got the measurements with calipers from a machined version of this i own. It should do the job just fine, but so far i…
Subaru sambar Shifter bushings to my KS3 sambar 1995 May or may not fit KS4
Can print from ABS or PETG. 2 variants included, 45º cutout, or no cutout. If no cutout you have to saw it to measure and give it some heat to push it into place.
a small bushing for door knocker on my 1995 GMC van, although it should work for many similar age chevy/gmc vehicles. it is a bit difficult to get on, but once it is it works very well. helps with rattling/ poorly closing doors printed…
This is a model of the bushing for the Daewoo Matiz steering column. The original part, after almost 20 years of service, simply fell apart at my feet one day. You can print the bushing in one piece or cut it into two halves in your…
The tailgate bushings in my Ford F150 finally wore out to the point it was hard to close the tailgate... You know what that means! Yep - Time to fix it with 3D printing! I modeled this set off my worn out parts and eyeballed a few things…
Fiat 500 shifter cable bushing. There is a recall for those, but it's helpful to have a quick replacement in case of temporary situation.
FreeCAD files are provided, so remixing and customizing is as easy as possible. If you find an issue in my models or have a request to modify them, please shoot me a message. UPDATES: V3 Bushing is now easier to install, previous model…
This is a bushing holder for pen turning bushings. They slide onto the stem of the bushing holder, but don't slide back off. Each holder has a 3" x 5/8" tab for a label (good for the Avery 6870 2.25"x0.75" labels). The bushing holders…
Uploading this to address 2 issues with the status quo, affecting any 924 or 944 with the steel front control arm design. Note that this is discussing the outer bushing, at the control arm. Stock rubber bushing will only work with the…
I designed this part a few months ago for a friend's aunt. Office furniture is kind of a big deal where I live and it is fair to say the chair was made locally. So, it was only right to fix it locally as well. As you can see in the…
These bushings (range of sizes) enable grasping the rounded end or sphere of a spindle. Please see my video for an application on www.AsWoodTurns.com From one end, the bushing is hollowed to accept a sphere of the given size. From the…
If you like this model, check out my profile for more designs and don’t forget to leave a like or follow! Description: This set includes 49 different bushings for longboards and skateboards. There are 7 shapes (Barrel, Cone, Fat Cone,…
Decided to make my own door bushing since I was never fully satisfied with the one I downloaded. They were either too loose or too tight. I made mine simple with virtually no play with the correct radius so they fit properly in the cup.…
Needed to install a Hornady Lock-N-Load Press and Die Conversion Bushing Kit onto my RCBS Summit press. The conversion kit allows you to use the Lock-N-Load die bushings on any reloading press that has a 1-1/4" - 12 threads. I used the…
Simple bushing to reduce the force required to unwind a spool of PolyMaker filament!
Matière : TPU Remplissage : 100% type de remplissage : peu importe Mur : 2 hauteur de couche : 0.2mm Support : non
This is a model of the plastic shift change ball/ bushing that goes on the shifter ball of the bottom of the shift lever of a 92/95 civic, 93/97 del sol (This is the bushing the lets the shift lever rotate in the shift linkage). NOTE:…
Subaru sambar Gear linkage bushing rear 4 pcs needed and 4 orings 14x19x2.5mm Abs or other heat resistant material recomended
Parametric flanged bushing. You can set the sleeve inner/outer diameter, sleeve height, flange outer diameter, and the flange height.
One of the heartaches of the X-10 Powder Measure is to remove the hopper and drum assembly from the lower part that attaches to the tool head, requires removing 3 M4 cap head Allen bolts. These bushings along with these thumb screws ,…
608-2RS To M4 Bearing Bushings print Settings: nozzle diameter: 0.20mm layer height: 0.20mm infill: solid walls support: NO walls: 3 top and bottom layers: 2 to 4 material: PLA Parts Needed: 608-2RS Bearings: https://tinyurl.com/2ctn43y3…
This is a replacement bushing for the circulation pump motor found in some models of Whirlpool and Kenmore dishwashers. Problem After just under two years of operation, our Whirlpool Gold Series dishwasher started exhibiting problems,…
Print settings can be important here for tolerance reasons. There are two files for one with tight tolerances and one with looser tolerances. We're talking .2mm difference between the two for fitting in the PVC fitting. Print Settings…
Designed by a friend of mine. Works best when printed with carbon fiber or glass fiber filament, as other filaments tend to warp or snap after a few uses. I found that carbon fiber ABS from 3DxTech is more than sufficient for this…
Need a placeholder for 608zz and 624zz bearings until a slow boat from china delivered the right things. these are none working placeholders and not actual bushings. Category: Hobby
The Umikot is great! However, I didn't like that the screws needed to be tightened most of the way then backed off ¼ turn, as that resulted in occasional binding and screws tightening/loosening during use until I added loctite to hold…
Cardboard spool bushings for various applications. Snap fit and low friction bearing surface ensures smooth and reliable operation. The standard bushing only uses a few grams of filament, perfect for using up scraps. Material with…
This is a thin wall test with both rounded and sharp corners. My slicer says it takes about 0.29m of filament, so it's a cheap test for adhesion, elephant-foot, speed, retraction, cornering, dimensions, thin-wall extrusion, and quality.…
Update 12/12/2023 I have added a new version that has 2 retention screws. The new model is named with v2 at the end The best solution for the use of Drylin bushings on your Y Axis and to replace the terrible mounts on your SV06.…
This is a quick connect bushing ring for use with generic bushings on the Festool OF1400 router.
Update 12/16/23 I have made a step file for you guys who need / want to remix this. If you need a specific change. I can probably do it too, fairly quickly, just message me and let me know. Original Post I modeled this based on Sovol's…
