Golf IV (MK4) Gear linkage rod bushings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gear linkage rod bushings for Golf MK4
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 206
- Makes
- 1
- Views
- 2,233
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I designed these replacement bushings for one of the gear linkage rods of the golf mk4 since you can buy only rod + bushings. In my case the rod it's still almost new except for some dirt, so I decided to make the bushings on my own. I don't know if the bushings are the same of the other likange rods, but the ones I replaced are of the last rod which engages on the gearbox lever as you can see from the pics.
This bushing has a little looser fit than the original made in teflon but it's not an issue, now it's been 2 months and they're still both in perfect conditions and didn't give me a single issue.
Print them in TPU with 100% infill maybe with a little higher temperature to ensure perfect layer adesion so it won't tear apart during more ""aggressive"" gear shifts. I tried also PLA and PETG but they're not suitable for this part.
Also remember to put some grease in them as you would do with the OEM part. I used standard SKF bearing grease. I don't know if other types of greases might have some sort of corrosive reaction with the tpu.
EDIT:
I made this part in 2022, now it's 2025 and it's still holding fine.