1 / 3
Golf IV (MK4) Gear linkage rod bushings — zdjęcie 1
1 / 3

Golf IV (MK4) Gear linkage rod bushings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gear linkage rod bushings for Golf MK4

Ocena
5 / 5
Polubienia
34
Pobrania
206
Wydruki
1
Wyświetlenia
2233
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I designed these replacement bushings for one of the gear linkage rods of the golf mk4 since you can buy only rod + bushings. In my case the rod it's still almost new except for some dirt, so I decided to make the bushings on my own. I don't know if the bushings are the same of the other likange rods, but the ones I replaced are of the last rod which engages on the gearbox lever as you can see from the pics.

This bushing has a little looser fit than the original made in teflon but it's not an issue, now it's been 2 months and they're still both in perfect conditions and didn't give me a single issue.

Print them in TPU with 100% infill maybe with a little higher temperature to ensure perfect layer adesion so it won't tear apart during more ""aggressive"" gear shifts. I tried also PLA and PETG but they're not suitable for this part.

Also remember to put some grease in them as you would do with the OEM part. I used standard SKF bearing grease. I don't know if other types of greases might have some sort of corrosive reaction with the tpu.

EDIT:

I made this part in 2022, now it's 2025 and it's still holding fine.

Tagi