1 / 1
Frankford Arsenal X-10 Powder Measure Bushings — image 1

Frankford Arsenal X-10 Powder Measure Bushings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bushings used with thumbscrews to convert your X-10 Powder Measure for tool less removal.

Rating
0 / 5
Likes
3
Downloads
113
Makes
0
Views
800
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

One of the heartaches of the X-10 Powder Measure is to remove the hopper and drum assembly from the lower part that attaches to the tool head, requires removing 3 M4 cap head Allen bolts.  These bushings along with these thumb screws, you'll need 3 thumbscrews, will allow you to perform tool less removal of your Frankford Arsenal X-10 Power Measure hopper and drum from the base of the powder measure that is attached to the Frankford Arsenal X-10 tool head. 

To install,  first remove the top screw and bushing from one of the linkage arms of the powder measure.  Next break off two bushings from the set of four and  install the bushings in the top hole of the arm, one on either side. Next thread on the thumb screw.  Finally, repeat previous steps for the other linkage arm.

Tags