1 / 1
Frankford Arsenal X-10 Powder Measure Bushings — zdjęcie 1

Frankford Arsenal X-10 Powder Measure Bushings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bushings used with thumbscrews to convert your X-10 Powder Measure for tool less removal.

Ocena
0 / 5
Polubienia
3
Pobrania
113
Wydruki
0
Wyświetlenia
800
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

One of the heartaches of the X-10 Powder Measure is to remove the hopper and drum assembly from the lower part that attaches to the tool head, requires removing 3 M4 cap head Allen bolts.  These bushings along with these thumb screws, you'll need 3 thumbscrews, will allow you to perform tool less removal of your Frankford Arsenal X-10 Power Measure hopper and drum from the base of the powder measure that is attached to the Frankford Arsenal X-10 tool head. 

To install,  first remove the top screw and bushing from one of the linkage arms of the powder measure.  Next break off two bushings from the set of four and  install the bushings in the top hole of the arm, one on either side. Next thread on the thumb screw.  Finally, repeat previous steps for the other linkage arm.

Tagi