Display Stand for Lego Pokémon Badge Collection - (LEGO Pokémon #40892 "Kanto Region Badge Collection")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You earned 'em! Put 'em on display!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't have the $650 it would have taken to score this set as a "gift with purchase" from Lego, but that wasn't going to stop me from adding it to my collection. After a few hours split between ordering the pieces from Pick a Brick, and recreating the set's sticker sheet in Adobe Illustrator, I finally had the set I so badly wanted, all I needed was a way to display it.
A few more hours of modeling later, and I have a sleek, minimalist display stand that shows off my badge collection in all its glory! The stand can display your badge collection with the case open or closed, and I've provided two different versions. One version has a shallow divot in the base to accommodate a 3.5" adhesive felt disc. The felt base gives the stand a more premium look, protects your shelf from scratches, and prevents the stand from sliding. The second version I provided has a flat base for anyone who would rather not bother adding the felt disc. You can find the felt discs I used on Amazon, but if you'd like to buy them elsewhere, they should be 3.5" in diameter and 3 mm thick.
I printed my stand using default print settings with a few modifications. Since the bottom of the stand has an indentation for a felt base, you'll need to enable supports. I used default autogenerated snug supports and they were very easy to remove using some needle-nose pliers. If your slicer generates any supports other than the puck of support material needed to fill the cavity in the base, feel free to delete these supports using the paint-on supports brush or support blockers, as they shouldn't be necessary. The only other modification I made was enabling fuzzy skin, and shifting the fuzzy skin thickness and point distance values to 0.2 mm, but this is totally optional. I also set the seam position to rear.
This was a fun project and definitely won't be my last Lego related design, so consider following if you like that sort of thing. I'd love to see your makes as well, so drop a pic if you print this design. Thanks for checking out my work, catch you later!