1 / 3
"more-grip" idler tension arm for WW IDGA and MK8 extruders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
idler for Wristwatch extruder if Hafþór Júlíus Björnsson would've built it
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Print it with like 7-8 walls, basically make it solid. Use best filament you have that does not creep and takes most heat. It might still bend after a while, but at least it will still hold grip before it touches the extruder body.
No supports needed, rotate the part so the face towards the stepper is on the bottom and bearing side is upwards.