Liczymy pasujące modele…
I had to cut long curtain rail Ikea Vidga into two pieces, but there were ceiling mount holder only for one part, therefore I created this model so I could use the other part, too. The original holder design is slightly modified for…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spare Parts Ersatzteile für IKEA Vidga Vorhangschiene: Verbinder und Befestigung
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
During attaching the 3-railed Ikea Vidga system to our ceiling, we needed to shorten the 3-railed curtain rods. As we calculated to reuse the access parts on other ceilings, we needed more ceiling mounts for those spare parts, as just two…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For 3D printing: I has been used ABS material because it is quite tough. Because wheel is very small it is best to use small nozzle like 0.25mm I has been increased hotend temperature +5°C above default The wheel diameter is set +0.1mm…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Inspired by 3D-Print Brehm 's Model, which unfortunately did not fit for my 3 wide rail, I decided to design a similarly optimized spare part for the Vidga triple rail. No special settings are required to print this model, however, print…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Verified and tested, it works fine now What is this? Reverse Integrated Drive Gear Assembly Sherpa Mini with mellow helical gears This helical gears was for Vz-HextrudORT CNC version Why not use bondtech BMG Reverse Set? because i can't…
Connector for IKEA Vidga rails to make a solid connection. Uses the set screws that come in the end caps with the rails, or any m5 bolt. Category: Decor
Midgar from Final Fantasy VII, or at least a version with all plates intact.
I needed to connect two Ikea Vidga rails together without putting an extra bracket on the wall, designed this little connector to fix the issue. Designed to use brass inserts and M3x12 screws, works with longer screws but they will stick…
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
The included connectors are really bad at lining up 2 (or more) Vidga rails, especially when using SwitchBot Curtain3 (U Rail). Tested with IKEA Vidga 1 track. Press fit, no screws needed. I have also added a distance to rest at the…
Upgrade your IKEA VIDGA curtain rod setup with this improved and highly overengineered connector! Designed to be significantly more stable than the original IKEA part, it minimizes wobbling for a cleaner, more secure curtain installation.…
You are probably better off just buying a bag of these if you're going to use a lot of them, but in case you just need a few or just prefer printing them yourself this model is tried and tested.
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
Clips to connect IKEA curtain to the Ikea Vidga Roller. As you can see by the picture, the design is practically 1:1. I printed it scaled up by 25% in x and y, so that it prints easier, also i needed the clip to be slightly larger.
The Vidga rails can be hard to align which can make moving curtains hard. Add two joiners to each joint to align them and make moving super smooth. I would recommend printing them in the colour of your rail system to make them less…
The curtain IKEA VIDGA glider & hook combo were not compatible with my curtain rails so I decided to design and 3D print new gliders for it. Design was inspired by: https://www.printables.com/model/731868-curtain-glider - This design got…
Update on 24/05/2020: The clamp has been reinforced and the "spindles" has been separated from the body so it's necessary to assembly. The Ikea Vidga rails are very fragile and if when mine was broke I decided invest 1 hour in design a…
Print from PETG with 100% infill. No supports needed.
I changed the part in order no to be visible from below. Therefor I did thighten up the tolerances an removed the outher part. Furthermore I changed the screw set-up to accomodate what i hat at hand. The connector is now fixed by two nuts…
The rails for the VIDGA curtain system are attached to the ceiling by two flimsy plastic part and interconnected by another, equally flimsy piece of plastic. When I tried to join two rails, they were misaligned and twisted against each…
Local ikea was out of stock of the Vidga Gliders with hooks https://www.ikea.com/us/en/p/vidga-glider-with-hook-white-20483002/ . 3D designed replacements. Recommended to print on side with supports as this allows for stronger prints.
Ikea Vidga curtain system is a great system. None of the standard parts fitted my needs for mounting the rail on the ceiling so I made my own additional parts. One for better extension of two or more rails and one to fit a 60mm ceiling…
Three bits I use for a few games, originally made for Champions of Midgard). Ham / Food Glory / Horn - this model includes a disc that I use to raise it off the print bed for supports. Wood - has a cutoff branch so it does not roll off a…
This is a spin on SIVIS's sherpa iteration for Mellow RIDGA, just with integrated collet holder. Uses Mellow RIDGA : Mellow RIDGA - Aliexpress Uses 4mm UM2 collet : UM2 Collet - Aliexpress Additional Details can be found at SIVIS's…
IKEA Vidga Wagen roller. gebruik de orgineele asjes en rollers weer
Jeweils zwei Verbinder werden in die Schienen geschoben, damit die Schienen besser fluchten.
Made these food tokens for Champions of Midgard... they match the game iconography. I painted mine in a few different shades and they came out quite pleasingly Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
These were made as replacements as mine broke due to heavy curtains and lack of rail support on the wall. The rail stop has a loop for a nail/screw against the wall to offload some of the curtain weight. Print without support. The joint…
Boxes to keep the dice and tokens together for Champions of Midgard. Boxes made for both expansions.
I have not tested this yet, but i believe it should work without major issues. some things might be remaining.
We have the problem that the small gliders inside the rail will chop where the rails are connected. This small gimmick will connect them better and let the glider "flow" better. OpenSCAD File included, if you wanna make them shorter or…
I started out by printing the dice/token boxes at https://www.printables.com/model/411987-champions-of-midgard-dicetoken-boxes But then I couldn't find a great way to organize the rest of the game pieces. There are several other…
Jörmungandr, the Midgard Serpent – 3D Printable Miniature Description: Summon the terror of Norse mythology with this highly detailed Jörmungandr miniature , the legendary Midgard Serpent destined to battle Thor at Ragnarök. Rising…
Sherpa Mini with support of Ridga gears and E3D collet for ERCF/MMU. the bowden collet used is: Embedded Bowden Collet for Metal (1.75mm) – E3D (e3d-online.com)
Coaster with Squidgame logo - not necessary multimaterial. Other coasters on my profile. Printed in PETG because temperature resistance. Simple print - change colour in layer.
VIDGA curtain rod system. wall bracket
Love the game. Hate the mess of pieces and parts all over the place so I designed a player board that holds everything for each player. It has a slot in the back for cards you want to keep track of such as end game victory bonuses.
If you want to use this mount you have to cut your rail. I reccoment cutting rail to width of the place you want to put it in -7mm. You can put it right to the ceiling when mounting. And don´t forget to put those hangers first :) . I…
Summary Spare part for Ikea VIDGA ceiling bracket Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 80 Filament brand: No name Filament color: White Filament material: PLA
Summary: I needed to replace some lost IKEAD VIDGA ceiling rail brackets but couldn't find a sufficiently optimized model ready made. I designed a new bracket from scratch using the measurements of a spare I found. My reasons for…
This is a remix of the excellent Champions of Midgard Jarl Edition board game insert by Snawk. There is no room for the board because I use the playmat instead, like the original insert. Printing Notes/Remix changes from the original:…
Thanks to @chwiede_775251 for the original model, I really liked the idea of it to be a bit springy to squeeze into the rails. However I don't have so many M4 grub screws but a lot of windows where I need to use the connectors. Replaced…
This is a remake of the "Ikea Vidga Rounded Section" curtain stop when you have little clearance above the rail. The regular piece requires the skrew above the rail for which I just didn't have the room (wanted it as close to the ceiling…
This is a remix of the recently released RIDGA HextrudORT 1.65 for Rapido but cut up to accept the E3D mount. I was so excited to try it out on my own that I made this! The original E3D HextrudORT was used as the base for the spliced…
A replacement part for Ikea VIDGA panel curtains No. 146964 / 146965 Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100% Filament: SUNLU PETG Category: Replacement Parts
After designing and printing my Legends of Andor game box ( https://www.thingiverse.com/thing:2250198 ) I decided to look around at my other games that might need organization. I typically use the standard divider boxes used in so many…
Disguise Mask - SquidGame - Netflix Keychain See my profile: https://www.printables.com/@InfoSakkez_1679090
Insert the aligner between the rails and push against each other for the perfect fit. Sawing holder for triple rails included too. Thanks in advance for uploading the makes! Print instructions Category: Household
Replacement part compatible with IKEA VIDGA (146963) sliding curtain end caps It's about 2mm shorter than the original. I made it this way so it can be printed without supports and still have the best orientation for strength! Took about…
I bought the Ikea Vidga curtain rails to replace the ones at home, during installation on the ceiling we managed to break 2 of the connectors between different rails. mocked up this easy to print easy to install and quite sturdy…
I grew impatient after I received my RIDGA set but the pack of idlers were not delivered yet so I found some bearings from the drawer, measured it and started remodeling the idler arm to fit the bearing so I can already start testing the…
Remix of the IKEA Vidga curtain slider - adjusted to fit in smaller curtain rails
Beschreibung 🔑✨ Schlüsselanhänger mit Symbolen 🟥⬜ Dieser coole Schlüsselanhänger bringt das spannende Gefühl von Squid Game direkt zu dir! 🎮🎭 Mit den bekannten Symbolen : 🔺 Dreieck ⭕ Kreis ◼ Quadrat passt perfekt an Schlüsselbunde 🗝,…
I'm building a cargo trailer camper and I'm using the Ikea Vigda sliding track suspended from the ceiling for the shower enclosure. Unfortunately when you buy the track it only comes with two hanger clips and I needed a couple of extra…
This thing allows you to connect 2 VIDGA pieces together permanently, without any chance of them popping away from each other. It also creates a completely flush connection, which is not visible from the side. You need 2 M3 6mm screws and…
IKEA Vidga spare rollers Wedge Shape for sliding instead of Rollers Click-In mounting System for convenience 4 M3x6mm-10mm Countersunk Screws per Pair An over-engineered Alternative for the Vidga Rollers.
Ein verspielter, beweglicher Oktopus im Stil der Wächter aus „Squid Game“. Mit seinem ikonischen Helm und den in Segmente geteilten Tentakeln ist dieses Modell perfekt als Schreibtischspielzeug, Deko oder Geschenk für Fans. A playful…
The beloved spouse asked for some motorized curtains. As we live in IKEA-country, we have the IKEA Vidga curtain rails already in a few rooms. The simple solution was to get a few of Aqara's Curtain Driver E1's However, the IKEA Vidga…
Hello guys, my problem was, that I don't want to screw a new curtain strip into our ceiling. I created glides to use the Ikea Vidga Curtains on our standard 7mm curtain strip. The clamp was print with 20% filling and without support…
Print with 100% infill and 0.25cm layer height
120mm unit sabot bases for Midgard tabletop battles. Includes warrior and skirmishers with 25mm rounds, a 'troll' base with 3x40mm rounds and a couple of mounted bases for 25x50mm bases. OK for FDM printers.
I printed it with white PLA to match my curtain panels, but you can print it with silver PLA to match your panels. You may want to scale up in 0.1mm increments to fit the curtain holder rail properly according to your printer settings…
Not suitable for PLA - use PCTG or ASA. A slightly more narrow and tall IKEA compatible curtain clip. Same max thickness as the original but more durable* and easier to attach to both rail and curtains. Includes locking slot such that it…
This should (in theory) work with RIDGA and similar integrated BMG style gears. I am presently testing with FYSTEC helical integrated gears. Please test, report, and improve.
Hallo, ich musste mir für die sehr instabile Verbindung von der IKEA VIDGA etwas einfallen lassen. Es ist einfach aber sehr Stabil. Ich habe es mit einem Infil 100% gedruckt. Gruß Bernd Hello, I had to come up with something for the very…
I began to print Solajin's great insert ( https://www.thingiverse.com/thing:2555504 ), but found that it didn't quite fit my existing plastic insert. The corners were too sharp, and all the pieces seemed slightly too large to fit without…
Recreated Ikea Vidga holder for Hugad curtain rod . Original was made from the alluminium. This plastic replacement must have 40% infill and must be printed from a strong material (PET-G). We used the Filament-PM and holder is not broken…
When I assembled the IKEA Vidga curtain rail, I had some leftovers that I decided to use for a simple shelf for LED light above my desk. Here, I'm sharing the models for connecting individual Vidga curtain rails, they might come in handy…
I installed a longer continuous section of Vidga rails across two windows and wanted to have a point in the center where I can attach the curtains for each window. Thanks for @Blizz for the original model. I only cut off the endplate and…
I made a small stand to balance the Midgar 3D model made by Jukka Seppänen (https://www.myminifactory.com/object/3d-print-midgar-101209) The stand should fit perfectly to the original size of the Midgar model. But in case it doesnt.. the…
Miter box for cutting Ikeas Vidga rails... print it with full infill for most robustness
This is a mount that lets you mount a Thinkware U3000 rear camera to a Silverado EV with a midgate. The rear of the truck cab completely opens up and the glass is removable and stowable. For the stock glass stowing compartment to work,…
I adjusted the Clockwork 2 extruder so that the Mellow DIY Integrated Shaft Direct Drive ISG Gear Kit is perfectly positioned. Mellow's hidden hint that something needs to be removed from the guilder helps the gears to run in principle,…
Useful for supporting for example a single corner piece that is not properly supported by the IKEA connector. Will need a fomay double-sided self-adhesive tape and needs some support when printing.
This is a replacement part for the beautiful "Midgard R1" lamps from the GDR time. Its used one the bottom of the lamp to insert the cable to the tube. I engineered this from pictures and it fit very well. I printed this with PETG because…
Took the original design of the VIDGA rail corner wall attach end stop component and placed the tab with the hole for wall attachment on the other side. Used fusion 360 (non commercial edition) - attached is the original file.
This upgraded connector is designed to provide a stronger, more reliable joint between IKEA VIDGA curtain rails. Unlike the stock solution, it uses embedded M5 nuts and grub screws to firmly clamp the connector in place, reducing movement…
Provides mounting for a stepper, optical encoder, belts and pulleys to open/close your curtains using IKEA Vidga track. https://philsprojects.wordpress.com/2022/10/13/ikea-vidga-curtain-opener/
Unifi G3 mount for Ikea Vidga curtain rail system.
Hey Team, I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt. To…
Edit 1 - 8 Feb, 2024 Based on the feedback I received on the first upload of the design, I modified my design and have uploaded a new STL. This should be even better at catching the neighboring curtains. The wings are wider, the height…
Design Concept The bust captures the intriguing and masked persona of a soldier from the Squid Game series, crafting a mysterious and minimalist aesthetic. Purpose Ideal for display among fans of the series or collectors of unique…
A model to connect two IKEA Vidga rails together. Uses bolts to hold it securely attached to the rails keeping the rails securely holding in place. The M5 bolts and nuts can actually be found in every IKEA vidga rail packs. it always…
you can also find it on makerworld
Recommended print settings: Material: PLA or PETG Infill % : 30+ Top/Bottom/Wall: 5x Supports: Yes Print Orientation: Default as modeled Brim: No
Magnetische Scheide für Midgards-Messer EDC Rettungsaxt v3. Für die Verbindungsstücke sind M3 Schrauben und Muttern verwendet sowie 5x8mm Magnete.
IKEA VIDGA Curtain Rail Connector – Hanger & M5 Upgrade This is a remix of the original IKEA VIDGA curtain rail connector upgrade. I modified the design to support the use of the original IKEA hanger elements , allowing the rail to be…
Fast way to mount your DT62 tracks in VIDGA wall mount Recently I bought DT62 tracks together with Aqara Smart Curtain Motor, but I already had wall mounts for VIDGA tracks from Ikea. This small adapter allows you to easily combine them…
While traveling to a LAN-Party back in the days I lost one of the feed of my PC case, so I used the remaining ones to create a model and print the missing one. Depending on the one you are missing you need a big one for the feet in the…
90° Verbinder für IKEA VIGDA Gardinenschienen
For mounting IKEA VIDGA at ceiling
Simple clip that inserts in a 3 wide Vidga curtain rail and can hold a couple of cables next to the rail. There are two versions; the normal one and one that can fit if you use a switchbot curtain opener.
Hi there, First upload here so I wanted to give these away for free! Small lightboxes, you can print these on prin
![[WIP] RIDGA Friendly Sherpa Extra Heavy Core](https://media.printables.com/media/prints/1216896/images/9131706_396d47c0-0ff3-4d13-981a-6b68284991a1_55781e31-4770-4a54-9c34-6c7d51eeb291/sherpaxtraheavy-rigda.png)
