1 / 1
IKEA VIDGA Curtain Rail Connector – Hanger & M5 Upgrade — zdjęcie 1

IKEA VIDGA Curtain Rail Connector – Hanger & M5 Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

VIDGA connector remix supporting original IKEA hangers, plus an M5 version using the end cap grub screws.

Ocena
5 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
70
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

IKEA VIDGA Curtain Rail Connector – Hanger & M5 Upgrade

This is a remix of the original IKEA VIDGA curtain rail connector upgrade.

I modified the design to support the use of the original IKEA hanger elements, allowing the rail to be connected while keeping the original mounting/hanger functionality.

I also added an M5 version. This version is designed to work with the M5 grub screws from the original IKEA VIDGA end caps, so the original hardware can be reused.

Versions

  • Standard version – compatible with the original IKEA hanger elements

  • M5 version – adds support for the M5 grub screws from the IKEA end caps

Printing & Fit

The model requires supports in some areas. Depending on your printer, support settings, and tolerances, some support material may remain on the surfaces where the hanger sits.

It may therefore be necessary to carefully file or sand away a small amount of material after removing the supports. Check the fit with the original IKEA hanger and remove material as needed until the hanger sits at the correct height and the rail aligns properly.

The goal of this remix is to keep the advantages of the upgraded connector while improving compatibility with the original IKEA VIDGA components and hardware.

Tagi