Nitehawk 36 ldo BMG Extruder IDGA / Clone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nitehawk 36 ldo BMG Extruder to mount to my extruder setup
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Hey Team,
I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt.
To attach the Nitehawk, you have two options:
- Screw in two M3 10mm bolts.
- Use a heat insert from the back with M2 bolts and secure it with M2 10mm bolts and a washer.
I recommend being cautious with the contact on top—consider using a little electrical tape for added safety, although I didn’t need it personally. See photo.
Please note, print at your own risk.
Printed in PLA and/or in PETG
Nozzle 0.4
Layer height 0.2
Wall Loops 3
Infill %40
Top and bottom 3