1 / 4
Nitehawk 36 ldo BMG Extruder IDGA / Clone Mount — image 1
1 / 4

Nitehawk 36 ldo BMG Extruder IDGA / Clone Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nitehawk 36 ldo BMG Extruder to mount to my extruder setup

Rating
0 / 5
Likes
0
Downloads
24
Makes
0
Views
496
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

Hey Team,

I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt.

To attach the Nitehawk, you have two options:

  1. Screw in two M3 10mm bolts.
  2. Use a heat insert from the back with M2 bolts and secure it with M2 10mm bolts and a washer.

I recommend being cautious with the contact on top—consider using a little electrical tape for added safety, although I didn’t need it personally. See photo. 

Please note, print at your own risk.

 

Printed in PLA and/or in PETG 

Nozzle 0.4

Layer height 0.2

Wall Loops 3

Infill %40 

Top and bottom 3 

 

Tags