IKEA VIDGA Curtain Rod Connector Upgrade - M3 Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdier replacement for IKEA VIDGA curtain rod connectors with M3x5 SHCS screws + nuts and easy installation
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 72
- Wydruki
- 4
- Wyświetlenia
- 258
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to @chwiede_775251 for the original model, I really liked the idea of it to be a bit springy to squeeze into the rails. However I don't have so many M4 grub screws but a lot of windows where I need to use the connectors.
Replaced the M4 holes with cutouts for M3 nuts and M3x5mm screws. I also cut off the top of the model, original height 8.3mm, new height 7.8mm, otherwise it was peeking out the top of the rail.
I used PETG for printing and scaled the model in X and Y direction to 101% to counteract the shrinking and to make it fit a bit better into my VIDGA profiles. I also used supports inside the M3 nut cut outs.