IKEA VIDGA Curtain Rod Connector Upgrade - M3 Nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdier replacement for IKEA VIDGA curtain rod connectors with M3x5 SHCS screws + nuts and easy installation
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 4
- Views
- 258
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to @chwiede_775251 for the original model, I really liked the idea of it to be a bit springy to squeeze into the rails. However I don't have so many M4 grub screws but a lot of windows where I need to use the connectors.
Replaced the M4 holes with cutouts for M3 nuts and M3x5mm screws. I also cut off the top of the model, original height 8.3mm, new height 7.8mm, otherwise it was peeking out the top of the rail.
I used PETG for printing and scaled the model in X and Y direction to 101% to counteract the shrinking and to make it fit a bit better into my VIDGA profiles. I also used supports inside the M3 nut cut outs.