IKEA Vidga parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement joint piece. Curtain rail stop with loop for nail/screw to fasten against wall.
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1491
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
These were made as replacements as mine broke due to heavy curtains and lack of rail support on the wall. The rail stop has a loop for a nail/screw against the wall to offload some of the curtain weight.
Print without support.
The joint was printed in PETG. Note this is only the part that is hidden in the rail. The other part was reused.
The rail stop was printed in PLA and is only designed with a 2mm hole for the fixing screw for easy printing. Use a 5-6mm drill to make it bigger. Use the original IKEA nut/screw.