Ikea Vidga 3-railed compatible Curtain Rod Ceiling Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clamp for attaching curtain rods to the ceiling, compatible to Ikea Vidgas’ 3-railed system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
During attaching the 3-railed Ikea Vidga system to our ceiling, we needed to shorten the 3-railed curtain rods. As we calculated to reuse the access parts on other ceilings, we needed more ceiling mounts for those spare parts, as just two are packed with each curtain rod.
After trying two different clamps from Printables, which just seem to work for the single railed curtain rod, I designed my own spare part to fit the 3-railed one.
Print Settings
Printing on the flat side worked well for me.
Filament: PETG
Layer Height: 0.2mm
Infill: 25%
Solid Layers (Top / Bottom): 5
Perimeters: 5
Complete individual objects turned on, whilst printing several ones.
Supports Removal
As supports are mandatory to print the locking mechanism when printing on the flat side, the supports needs to be removed. The easiest way is to simply put the clamp in the unmounted rail and test the mechanism. With rotating the holder, the supports get loose. In some cases, the holder then must be pushed out on either end. After that it should be more easy to pull out the supports. As the issue with blocking supports could arise, I recommend this before mounting. This is my preferred way.