1 / 10
Old curtain hanger VIDGA from IKEA
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea stopped to deliver curtain hanger Vidga and sells new version that is not mechanically compatible with previous one
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
For 3D printing:
- I has been used ABS material because it is quite tough.
- Because wheel is very small it is best to use small nozzle like 0.25mm
- I has been increased hotend temperature +5°C above default
- The wheel diameter is set +0.1mm bigger because it schrinks after cooling
For rework:
Buy Vidga hangers with new kind wheels.
It seems that Ikea stopped to distribute wheels anymore :(
Follow steps 0 to 6 (image names) to rework new curtain hanger to old one.
0. Initial new curtain hanger
- Dismount wheels and axles
- Cut lower plastic part
- Cut overhangs with sharp knive
- Cut axle from 11mm to 8mm
- Press wheels to axle
- And a curtain hanger is reworked