Old curtain hanger VIDGA from IKEA
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.44 – €0.54 net (excluding VAT)
For file: KoleckoZaclona_0.25n_0.1mm_ABS_MK3S_43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 43.2 min
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ikea stopped to deliver curtain hanger Vidga and sells new version that is not mechanically compatible with previous one
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
For 3D printing:
- I has been used ABS material because it is quite tough.
- Because wheel is very small it is best to use small nozzle like 0.25mm
- I has been increased hotend temperature +5°C above default
- The wheel diameter is set +0.1mm bigger because it schrinks after cooling
For rework:
Buy Vidga hangers with new kind wheels.
It seems that Ikea stopped to distribute wheels anymore :(
Follow steps 0 to 6 (image names) to rework new curtain hanger to old one.
0. Initial new curtain hanger
- Dismount wheels and axles
- Cut lower plastic part
- Cut overhangs with sharp knive
- Cut axle from 11mm to 8mm
- Press wheels to axle
- And a curtain hanger is reworked