Sovol Zero Toothed adjustable Belt Clamp V2 Prototype
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single Piece Version. Be the first to print and test it!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
When i revisited the clamp on release, i was less scared about the grip on the belt. So this version could be better be course it's a single block and also more accessible without the need for M2 screws. I have no time to test it tho.
It uses flat a GT2 Profile and 1/4 from a 16T GT2 Pulley with narrowed teeth to not transmit the pulling force into it at the end of the bend. Modelled in Openscad with libraries for GT2 i found Online.
Print Settings:
Print with 0.1mm Layer height max.
The top part must be printed on the 45° chamfer.
Use Support for somewhat better looks.
I did not need a Brim.
These instructions were written by a human who may have misunderstood gravity; follow them at your own risk of sudden plastic betrayal.
Step 1: Print. Step 2: Pray. Step 3: If it breaks, refer to Step 2. I accept no responsibility for entropy or slicing errors.
Happy Printing :)