Sovol Zero Toothed adjustable Belt Clamp V2 Prototype
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single Piece Version. Be the first to print and test it!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
When i revisited the clamp on release, i was less scared about the grip on the belt. So this version could be better be course it's a single block and also more accessible without the need for M2 screws. I have no time to test it tho.
It uses flat a GT2 Profile and 1/4 from a 16T GT2 Pulley with narrowed teeth to not transmit the pulling force into it at the end of the bend. Modelled in Openscad with libraries for GT2 i found Online.
Print Settings:
Print with 0.1mm Layer height max.
The top part must be printed on the 45° chamfer.
Use Support for somewhat better looks.
I did not need a Brim.
These instructions were written by a human who may have misunderstood gravity; follow them at your own risk of sudden plastic betrayal.
Step 1: Print. Step 2: Pray. Step 3: If it breaks, refer to Step 2. I accept no responsibility for entropy or slicing errors.
Happy Printing :)