1 / 5
iexos 100 azi adjuster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
azimuth adjuster for iexos 100 pmc eight.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
i made this azimuth adjuster, thats ALOT better then the most out there. this is not a 2 screw thing you need to adjust from either side. this just has one long thread. so you only screw on the one side and it will move the whole mount. its alot better and alot faster to polar allign. and alot less frustation. you only need 6mm rod, with 2 end nuts, (cant remember what they are called), and one of those furniture screws, where its 10mm diameter, with a 6mm thread in the middle. im gonna post a picture of it.
