Parametric Anti-Shake Table/Desk Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti shake for your table.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
An anti-shake stabilizer for your table/desk with a high speed 3d printer.
Fully parametric to fit any desk with a similar structure, keeping it flush against the wall and eliminating any wobble.
No need for drill, just use your VHB tape.
Requirements:
Similar table/desk structure: square tube frame supporting the desktop.
1x M5 nut, 1x M5 screw (10mm or longer).
VHB tape (for securing to the wall).
ABS/ASA are recommended, though PLA also works well for me.
The attached STL file is tailored specifically for my own desk. However, the SCAD file is also provided (AI assisted design). You can open it in OpenSCAD to adjust almost every parameter, making it customizable for any desk with a similar design.
P.S. When slicing, it's highly recommended to add a modifier around the nut hole and set the infill rate of the modifier to 100%, that will significantly increase its mechanical strength.
Disclaimer: Use generative AI to regenerate the SCAD file from my original design.
描述
无需钉墙的防晃动稳定器。
参数化，可适配任何相似结构的桌子，贴住墙面、消除晃动。
需求：
桌子结构：方管框架承托桌板
1x M5 螺母，1x (M5 x 10+) 螺丝
VHB 胶带贴墙
建议使用工程材料，但个人使用 PLA 也没问题。
随附的 3MF 文件只适用于我这张桌子。
同时提供 scad 文件，可用 OpenSCAD 打开，几乎所有参数都可以调整，能适配任意相似结构的桌子。
P.S. 如果用 SCAD 生成，切片时可以在螺母孔周围添加立方体修改器，将螺母周围的区域，改成 100% 填充以提升强度。