Floating Shelf Adapter for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a floating shelf to your honeycomb wall for more storage.
- Ocena
- 5 / 5
- Polubienia
- 138
- Pobrania
- 242
- Wydruki
- 2
- Wyświetlenia
- 3498
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Honeycomb wall storage floating shelf adapter to be used with: https://www.printables.com/model/152592-honeycomb-storage-wall
Print Settings:
Layer height: .2
Perimeter: 4
Infill: 25% I used gyroid
Supports: I drew on supports for the shelf screws (shown in GCODE)
Mounting:
***Each adapter must be securely fastened into a stud, anchor, concrete, wood, etc***
**There are 3 sizes of adapter. It is recommended to use larger adapter near the base.
- With the honeycomb wall fastened to the wall install “Insert empty” of the original design into desired mounting points.
- Place the floating shelf adapter in the empty insert and mark the location of the hole.
- Remove the adapter and drill the necessary sized hole.
- Install anchor if necessary and install floating shelf adapter by screwing into the wall.
- Place the shelf on the adapter to check fitment, level, and mark holes.
- Drill pilot holes if necessary.
- Install all shelf screws.
I made a corner shelf to fit above my MK3 to hold 6 filament spools with guides to aid in quicker filament changes.
More pictures to come as finishing touches are done.
***ADDED***
Filament guide design to screw into the shelf for smooth movement from shelf mounted spools.