Pasco Scientific Aluminum Track ramp attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ramp Attachments for Pasco Scientific Aluminum Track. Allows carts to roll down and onto the table at specific angles.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
These are ramp attachments for Pasco Scientific Aluminum Track. The only fit tracks that say Pasco Scientific. If you have a ramp with just the label Pasco, it has a different interface.
It allows students to roll carts and other objects down the ramp and continue onto the table or floor. I have created a number of different angles (10, 20, 30, 40, 45) and with the .F3D file you can create custom angles.
Update the plane (Change Angle). Note the value you update is 90-Inteded Angle. For example if you want 55, you would input 35.
To update the numbering on the side of the print, you can update the Angle Number sketch and the extrusion should automatically update.
I printed these stock settings (.2mm layer height) on my Centauri Carbon with normal supports, but I imagine Tree would work as well.
Not all of the ramps need supports, but if you are printing out a batch, it is good to enable supports in case they are needed.
To minimize supports, I print in the same orientation they are used (numbers in normal orientation). but it leads to stair stepping on the surface interacting with the cart/ object.
Printing it with the numbers upside down, would prevent the top surface from stair stepping, but would require more supports and a harder support removal.