200 modeli
Summary This modular ramp allows robotic vacuum cleaners to easily overcome door thresholds and small height differences. The individual segments can be flexibly combined to achieve different widths. Key facts For overcoming door…
Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Had to make my own version, to get my own character on the bridge and pillars.…
A scaled-up version of the original, and then split and modified to allow easier printing, and for being able to join them back together. You can use as three split ramps, individual jumps or all joined together. I recommend printing with…
Cable ramp models for desktop fun, based on the straight model found at link below by user HamAndChris https://makerworld.com/en/models/1632665-cable-protector-replica-safety-cover-step-guard Fits cables 4mm diameter or smaller. Mix and…
Split the ramp into 2 for easier, faster print and choice, can be glued together if you like. Each side takes about 5 hours on low quality settings in cura with 5% Grid Infil, 4 walls and smart seam on the sharpest corner for a nice…
Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…
Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…
4 Different ramps to play with a fingerboard!!!
I didn't find a slide case for the arduino mega/ramps with mounting holes so I decided to make my own :) and it fits perfectly - no need of screws or anything else. I will mount it on the outside of the 3d printer enclosure and slimply…
Summary This is a easy-to-print 1:24 scale model of car ramps in a kit card style. The single parts are also available. Print Print with 0.2 - 0.3mm layer height. No supports are needed. Use 3 perimeters - infill not needed. Small print…
I did not find a nice enclosure for a Ramps 1.4 so i made one. You need 6 M3 x 10mm screws for the enclosure and 4 M4 x 15mm screws to mount a 80mm fan. Its printable pretty fast as the enclosure is not really thick, still rigid enough…
This enclosure is for Arduino RAMPS electronics . It is suitable for Prusa i3 frame (MK2/MK2s/MK2.5/MK3) and for Prusa Bear Upgrade (from Grégoire Saunier - check his amazing work). I have modified the Original Prusa base and lid (…
ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…
Designed to hold my TRX4M as a stand or to see how much flex I'm getting. The small stand I think looks better. But the taller stand you can tilt the rig on the ramp itself, as the diff catches the ridges on the ramp. Otherwise it's a…
Greebles Part 4! Large Door and Ramps! In need of heavy-duty armoured Large Door and Ramps? Here you are! Designed for use with “ Way Basics Eco Stackable Storage Cube, Cubby Organizer (Tool-Free Assembly and Uniquely Crafted from…
There's a few included files to let you print how you want to. The fenders should just snap on, although you can glue them to make them permanent. I used an M2 screw as the axle for the wheels, it needs to be at least 10mm long if memory…
Prusa Firmware 3.9.0 (MK2S) for Arduino RAMPS 1.4 board In my github repository ( https://github.com/cimoalpacino/Prusa-Firmware/tree/MK2S_3.9.0_RAMPS ) you can find and download the source code of a working Prusa 3.9.0 firmware running…
My kid is into ramps and bridges right now. Loved the models from MichalFanta, but had issues with its compatibility with IKEA Lilabo pieces. Ive modified these files to the correct ramp heights, and changed the connector dimensions to…
Car lift ramps for any 8 stud wided speed champion cars and SUVs as well as narrowed the ramps to fit the F1 racers Update 6/14/2026: added narrower rams for F1 racers and widen pillars to have a tighter fit Update 8/9/2024: created some…
Needed ramps to go with the excellent trailer by Bedzplane https://www.thingiverse.com/thing:3775599 The ramps use M2.5 hex caps. The bracket that mounts to the trailer are M2 hex caps and some really tiny screws that i had on hand (might…
This is my version of Ramps enclosure. It has some features that I wanted and could find: a lot of vents for cooling 2 fans: one that blows air on top of motor drivers and one that is longitudinal to the Ramps board enough space on the…
Come support these models over on Patreon Buy my time, Not my models. Two-wide cargo container jump ramps with added bits for Gaslands. Separate .stl for the breakover piece to fit (no glue needed) these smoothly onto Sablebadger's…
Parameters Holes 3.5mm 7.00 mm for the bolt head 6.00 mm for the female screw 5.20 mm bottom hexagonal (female screw) Fan size : 50.20 x 50.20 mm distance between holes mid point hole size 4.20mm and 6.50 for the bolt head Commutable…
There are several ramps on here, so they won't all fit on one build plate. Just pick the one you want and print it up. I'd recommend using a brim while printing to prevent lifting
This is a parametric ramp for a robot vacuum. I reconstructed the design based on Richard Butler-Malone’s design using Fusion’s parametric model. For an 800 mm threshold and 50mm depth (10.2°, 18% incline) version, you need the following…
Simple mount that holds a RAMPS 1.4, Arduino MEGA, and cooling fans. Slots in side of "case" allow for neat running of stepper motor and other wires to keep them out of the airflow path. The fan mount is designed to allow the use of…
trapy (najazdy) skala 1:10 używać w skali pomniejszenia 1%.
This is a new and improved version of my Ramps 1.4 enclosure. It is a little larger than the original and has some new features added. New Features: More openings for ventilation to improve airflow. Functioning reset button. Mounting…
My kids play with toy cars of varying sizes and my mother-in-law back in the day had a big set that her kids used to love. These roads are very easy to print, I've made the connection points oversized for little people who may not have…
Full enclosure for Ramps 1.4 board and my first Fusion 360 project.
Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…
For my new 3D printer build, VORON Legacy, I wanted to use the RAMPS board I had laying around. There's no existing DIN rail mount brackets for Arduino Mega as far as I know, so I created a set of brackets to use with VORON Design's DIN…
PitchCar ramp, special straight underpass and overpass roads. Compatible with Flounder1664 and scottkarch tracks pieces. Category: Games
Modified DIN rail bracket for arduino mega + ramps. Uses M3 nuts. Additionally I made a cover for the electronics to protect them a bit.
I made this to try and keep my Ramps 1.4 cool, and keep the debris from the cnc out. Wire management should be easy and provide for better cooling of the drivers. Lcd header and wires still fit. The ramps set gets snapped into place, put…
This is my custom enclosure for the OpenAstroTracker open-source motorized sky tracker for DSLR cameras. Details for this project can be found here: https://wiki.openastrotech.com/ I was looking for a compact enclosure for the minimalist…
This collection of bridge pieces will take your trains to new heights. They are compatible with Brio, Ikea, and most other brands of wooden trains. Ramps Two different types of ramps are offered. The “N type” ramps are very similar to the…
stationary service ramp /lift for hot wheels type cars 1:64 scale
After using a Ramps Box that a friend designed (TechyG), I decided I wanted a box that would hold more components and have a bit of room to work when I needed to repair or upgrade my printer. So I set out and designed this box, loosely…
This little gem was inspired by a ton of variations of ramps boxes i found through the search function... I was looking to keep my drivers cool and keep little fingers (like those of my kids) and teeth (like those of my cat) from touching…
This universal connector, to its special design, fits all popular wooden railway tracks. The sides of the railway bridge should be glued to the track. Compatibility: IKEA Lillabo BigJigs LIDL train BRIO According to the license, you can…
The original box was nice but didn't fit the Smart Adaptor and had a few glitches. Instructions The box shrinked too much when printed in ABS so I scaled it slightly to be printed in ABS. I also noticed that a few of the connectors were…
I've seen lots of people using finger skateboards at my school they are always looking for stuff to skate on so I made some fun skating ramps that are easy to take with you because they are small. PLEASE LIKE THANK YOU 🙏
This is RAMPS mount on the aluminum extrusion 2020. Ramps mount with the possibility to install the fan 40mm. Bolt M3 x 25mm - 3 (Ramps bolt) Bolt M3 x 20mm - 2 (bolt for 11mm Fan width) Nut M3 - 5 Print Settings Printer Brand: RepRap…
Case for Graber i3 with RAMPS board. No more exposed wires! with better thermals than running it open. Design I designed it in a way that you don't need to remove the Arduino from the printer, the so you can install it with minimal work…
I designed this because I don't trust the tiny MOSFETs on the RAMPs board any more than I trust the ones on the factory Anet board, but the MOSFET was hard to mount in any reliable or attractive way. This has a standoff of around 12mm to…
Below you will see what has been changed from original, missing parts are not modified and may be got from original. At the moment I only mounted lcd inside case, NOT YET TESTED WITH RAMPS, I'm waiting for cables extensions. 20xx-xx-xx:…
A very easy to mount Bracket for the Arduino Mega board. The bracket mounts with T-Nuts to 2020 extrusion beam. The board slides onto bracket and is held in place by a retaining clip. You can also mount bracket with board installed using…
A set of tech deck ramps modeled off the ones included inside Tech Deck skatepark sets. The colllection includes: 1x1 Quarter pipe vert ramp 1x1 Bank ramp 1x1 Convex ramp 1x1 Wall panel - MORE TO COME- You may find some issues with the…
Update (5/14/2019): v4 uploaded and IT WORKS. Now I just need to redesign the cover, as it does not fit. The Solidworks files have not been updated, they have been converted and mutilated several times now. Gross. Update (5/10/2019):…
The WRO RoboSports discipline needs ramps on the mat. This model provides 3D printed parts for a simple assembly, especially regarding a sharp edge at the front of the ramp. For assembly 3mm foam plates are required. Drawings are included…
This is a remix I made for some parts on the printer enclosure by obor. I 'modified' the LCD Bottom part from ZhilDV to have holes so you can mount it on the enclosure's frontpanel. I remixed it so it fits a 12864 RepRap Full Graphic…
Ramps and Arduino Case with enough space for wiring and a 50 mm fan on the cover. Please rotate the top part when printing, so you dont need support. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: 3D…
I Adjusted the hinges to mount Cimalpacino's Ramps enclosure to my Bearmod Scratchbuild made out of regular I-Type 20x40 T-Slot profiles. Just in case someone else cheaped out on the extrusions. Mounted mine with M4x8mm Screws.
This is a case designed to attach to the Y-plate on the LowRider2 CNC. It fits to the 4 screws on the upper and lower corners of the Y-plate. In this Version i wanted to integrate a bigtreetech skr1.3 board and also a dc converter as you…
Decided to upgrade my Wanhao Duplicator i3 from the Melzi to the RAMPS board in order to add the BLTouch sensor. Since there wasn't that many great cases for this setup I decided to create something from scratch. The original control box…
My version of the RAMPS electronics case. To be mounted on the Prusa i3MK2 frame. The whole thing is bolted together with M3 screws. Requires drilling two mounting holes in the frame
Case for RAMPS 1.4 Case for Mosfet 3D Freunde -- 2 versions, for one or two mosfet 03.05.2018 update Case Ramps (v2 is new) # update: Layout Holes 23.04.2018 update cover plates for 80mm fan 20.04.2018: update Case Ramps and Case Mosfet…
Quick thing I threw together which allows the RAMPS v1.4 motherboard to be mounted instead of the ender 3 motherboard
This design was inspired in the original Voron 1.5 enclosure and in Dasaki 1.4 ramps enclosure (see link) The aim was to provide good air circulation even with fan fail and a wide open lid for facilitating maintenance. There are several…
#EN Ramps for wooden railway. It is compatible with IKEA LILLABO and BRIO and maybe other brands as well. Supports are three 2x4 DUPLO bricks. Designed for 205 mm long straight track, but it may work with 240mm as well. 145 mm track seems…
hello friends Welcome back to aakaar lab here is another design for ramps 1.4 housing / enclosure for 2040 extrusion
This is a simple RAMPS 1.4 case drawn in Freecad. The top locates a 40mm Fan. The bottom is just open, so air and wires are free to exit. The primary problem I was trying to solve was the RAMPS fan causing a draft across the printing bed.…
This is a parametric RAMPS enclosure with various tunable parameters. The included STLs are specifically for a RAMPS 1.4 with LCD board and a 40mm fan mounted on the interior top, with a mounting offset for a SeeMeCNC LaserCut Prusa i3…
This model shouldn't need anything to print well.
Just print it... Category: 3D Printer Accessories
Display holder Ramps 1.4 display modul 128×64
A Voronoi-pattern box for RAMPS and two MOSFETs, mountable on an AM8 or similar printer using 2040 extrusions. The Arduino and MOSFETS can be mounted using M3x10 screws. A structure in the top-right corner can be used for cable…
These are parts remodelled from the original
A number of different stairs and ramp options. The ramps are designed to accept either a cardboard or plastic plane as the ramp, only the supporting braces are provided. The additional accents for Ramp1 can be found in my PLF Tips and…
I want to roll my office chair over the threshold between the office and the next room. Threshold ramps are commercially available, but I wanted a custom size. In Thingiverse's customizer you can set the height of the ramp, the length of…
This is a re-mix of my Simple RAMPS 1.4 mount to be compatible with the new Re-Arm Smoothieboard. This mount is beefed up from the original RAMPS 1.4 mount to fix some of the original breaking issues I had. Simple mount that holds a RAMPS…
hi i needed a ramps with arduino mount for 2020 but didnt like what i could find so i made this instead. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 20% Filament:…
These are simple ramps to assist with storing screwdrivers in a toolbox drawer.
A flat piece allowing for the electronics case of a MK3 to be mounted to any frame with holes for a RAMPS board. Only needs four M3 Screws. Uses the hinges from the stock Prusa MK3. I had an old i3 clone frame from Ooznest here in the UK,…
***Update 22/12/17 Ive added the bill of materials gerber files for the re-arm for ramps pcb i had problems finding a fab house the uses Diptrace files so i have converted them to gerber files Here is the link to the original files:…
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this…
Electronic holder for Arduino mega2560 & Ramps 1,6
Eliminates one more place that beans get stuck in the Rancilio Rocky grinder chamber. I also like to use these little nubs to prevent beans from getting stuck in the screw holes for the diverter. Food Safety Printing a part from food safe…
i printed with pla+ and with the ramp facing up
The original motherboard for my A8 has been getting flaky lately, so I replaced it. I needed something to hold it in place and the existing options didn't quite do what I wanted, so I knocked this together in OpenSCAD. It holds an Arduino…
This box holds everyhting RAMP's 1.4 and has spare room in the bottom for extra wires. Instructions This will hold a fully loaded RAMP's 1.4 with Smart adaptor and has a hole for a 1/2" power button and a 1/2 power indicator. It also has…
Whipped this up to give to my Grandpa, thought it would give others a good laugh too :)
Simple ramps to make it easier to roll the bench on and off the lifting platform. Made for 3/4" thick platform.
Enclosure for Ramps 1.4 and Arduino Mega 2650. Attaches to 3030 V-slot with 5mm bolts and slide nuts, all other hardware is 3 mm (12 bolts, 9-12 nuts). The variation in the number of nuts is due to variation between printers used.…
Fan mount which allows the fan to be tilted in all directions. The fan also is decoupled via rubber bands to reduce noise and vibrations. I prited it with a 0.5mm nozzle and 0.24mm layer height.
Although there are many versions of the cooler motherboard here's my contribution to society. The elements are connected with the 3 mm screws and also I put a little help and I left more holes that can squeeze or attach cables using them.…
Altered the design as the original had holes for buttons which i didnt require.
Arduino Mega / Ramps / OLED screen and encoder / switches with clip on 20x20 extrusion mounting. easy mount system Screen and encoder setup: Connect the screen Vcc, Ground, SDA and SCL to the I2C connector next to the endstop pins. Rotary…
This is a remix of the " P3steel 2.x - RAMPS offset mount " by Toolson for a RAMPS/MEGA board, but specifically for a 2.5 DXL laser cut frame which seems to have it's electronics mounting holes in a slightly different configuration than…
Just a simple mounting plate for an Arduino Due and RAMPS-FD that I plan on tucking behind the control panel (with graphical LCD and Raspberry Pi) in my Hypercube 300 build. It should also work with an Arduino Mega and RAMPS 1.x or most…
This is a mount for the Anet A8 to attach a RAMPS 1.4 Board, a mosfet, a stepdown-converter and a raspberry pi zero to the original holes on the mainboard side. Print Settings Printer: Creality CR-10 Rafts: No Supports: No Resolution:…
Recommended to print it standing up to prevent weird layer lines.
In case you have RAMPS mounting holes on a frame but want to mount a RAMBo board in its place instead. Use this and you're set. Instructions Print. Mount plastic part using RAMPS holes. Mount RAMBo board. Done. I made this after seeing…
#EN Railement / Derailement / Track-to-Surface ramps for wooden railway. It is compatible with IKEA LILLABO and BRIO and maybe other brands as well. Allows to easily drive your cars and trains from floor to the rails and back. (Check my…
This is my attempt to fill in the gap of the missing RAMPS enclosure for the Prusa I3 Bear Upgrade. I made this electronics enclosure because I've got a cloned Prusa MK3 that I wanted to upgrade to a sturdier frame. This version ONLY…
I didnt need the side open like the design so i made a simple panel to hold another cooling fan
120mm fan mount for the tevo tarantula ramps "enclosure". Nothing special required to print. Print instructions Category: 3D Printer Parts
