Ramps 1.4 enclosure V2 / case / box for ramps board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a new and improved version of my Ramps 1.4 enclosure.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 150
- Wydruki
- 2
- Wyświetlenia
- 1026
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a new and improved version of my Ramps 1.4 enclosure. It is a little larger than the original and has some new features added.
New Features:
- More openings for ventilation to improve airflow.
- Functioning reset button.
- Mounting options for attaching the enclosure to a 3030 Al. profile.
Further improvements are to the mounting hardware. It now only requires M3 screws and bolts to screw down the ramps board, fan and all the panels. It is possible to use M4 screws to attach the 5010 fan, just drill out the holes with an appropriate drill.
Mounting hardware required:
- 20 x M3 nuts.
- 5 x M3x20 bolts.
- 6 x M3 x 16 bolts.
- 4 x M3x12 bolts
- 8 x M3x10 bolts.
Optionally If you strip one of the threads for bolting the lid on, print the Lid Nut Holder Left (or right).3mf file and press an M3 nut in it. You can then use it to bolt the lid back on with a longer screw.
If you want to bolt the enclosure to a 3030 Al. profile, print the Mounting Bracket.3mf twice. Then use a 3mm drill to manually drill the rest of the way thru the enclosure wall from the inside. Bolt the mounting bracket on to the enclosure first. The bolts should go from the outside of the enclosure thru the bracket in. Secure the bracket to to the enclosure with M3 nuts. The M3 nuts should be inside of the enclosure NOT the bolt heads. Use two M5x25 bolts to bolt the mounting brachet with the enclosure to the Al. profile.