1 / 4
LCD12864 Arduino RAMPS case with 30x30 fan v3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Below you will see what has been changed from original, missing parts are not modified and may be got from original.…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Below you will see what has been changed from original, missing parts are not modified and may be got from original.
At the moment I only mounted lcd inside case, NOT YET TESTED WITH RAMPS, I'm waiting for cables extensions.
20xx-xx-xx:
- Coming soon: I suspect that original connector can't be used with 15A power (10A bed and 5A board) so I'll replace it with SI30 ones, see link below as reference
2018-11-10:
- Enlarged small fan grid
- Fixed missing space for fan body
- 0.4mm gap reduction between 'Capot_Ecran' and 'CarterPrincipal'
2018-11-02:
- SD slot has been aligned with my LCD
- replaced 25mm fans with 30mm (Use M2.5x14 screws)
- enlarged exit cables hole
Print Settings
Printer:
Prusa i3 MK2S DIY clone
Rafts:
No
Supports:
Yes
Resolution:
0.25mm
Infill:
20%
Filament:
Tomas3D/HicTop PLA
White/Red
Notes:
Cover needs supports because I removed SD slot original embedded ones
Category: 3D Printer Parts