1 / 4
LCD12864 Arduino RAMPS case with 30x30 fan v3 — image 1
1 / 4

LCD12864 Arduino RAMPS case with 30x30 fan v3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Below you will see what has been changed from original, missing parts are not modified and may be got from original.…

Rating
0 / 5
Likes
5
Downloads
64
Makes
1
Views
549
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Below you will see what has been changed from original, missing parts are not modified and may be got from original.

At the moment I only mounted lcd inside case, NOT YET TESTED WITH RAMPS, I'm waiting for cables extensions.

20xx-xx-xx:

  • Coming soon: I suspect that original connector can't be used with 15A power (10A bed and 5A board) so I'll replace it with SI30 ones, see link below as reference

https://it.aliexpress.com/item/10-Pairs-X-30A-600-v-Connettore-Alimentazione-Spina-PP30-Rosso-Nero-PP30-Powerpole-e-20/32906818014.html

2018-11-10:

  • Enlarged small fan grid
  • Fixed missing space for fan body
  • 0.4mm gap reduction between 'Capot_Ecran' and 'CarterPrincipal'

2018-11-02:

  • SD slot has been aligned with my LCD
  • replaced 25mm fans with 30mm (Use M2.5x14 screws)
  • enlarged exit cables hole

Print Settings

Printer:

Prusa i3 MK2S DIY clone

Rafts:

No

Supports:

Yes

Resolution:

0.25mm

Infill:

20%

Filament:

Tomas3D/HicTop PLA

White/Red


Notes:

Cover needs supports because I removed SD slot original embedded ones

Category: 3D Printer Parts

Tags