1 / 3
Fast printing Case for Arduino Mega with RAMPS 1.4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for Arduino Mega with Ramps 1.4 to controll motors.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 480
- Wydruki
- 3
- Wyświetlenia
- 1720
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (35)Powiązane
I did not find a nice enclosure for a Ramps 1.4 so i made one.
You need 6 M3 x 10mm screws for the enclosure and 4 M4 x 15mm screws to mount a 80mm fan.
Its printable pretty fast as the enclosure is not really thick, still rigid enough for its usecase. Took me about 2 h on my X1C.
If you have any questions feel free to contact me!