1 / 17
Prusa MKx and Prusa Bear RAMPS Enclosure — zdjęcie 1
1 / 17

Prusa MKx and Prusa Bear RAMPS Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This enclosure is forArduino RAMPS electronics.

Ocena
5 / 5
Polubienia
47
Pobrania
435
Wydruki
5
Wyświetlenia
3118
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This enclosure is forArduino RAMPS electronics.

It is suitable forPrusa i3 frame (MK2/MK2s/MK2.5/MK3) and forPrusa Bear Upgrade (from Grégoire Saunier - check his amazing work).

I have modified the Original Prusabase and lid (https://www.prusa3d.com/prusa-i3-printable-parts/) and thelower lid hinge from Grégoire Saunier (https://github.com/gregsaun/prusa\_i3\_bear\_upgrade).

The other 3 hinges are same as the hinges on Greg's github repository.

Happy printing :)

Print instructions

Category: 3D Printer Parts Summary

This enclosure is forArduino RAMPS electronics.

It is suitable forPrusa i3 frame (MK2/MK2s/MK2.5/MK3) and forPrusa Bear Upgrade (from Grégoire Saunier - check his amazing work).

I have modified the Original Prusabase and lid (https://www.prusa3d.com/prusa-i3-printable-parts/) and thelower lid hinge from Grégoire Saunier (https://github.com/gregsaun/prusa\_i3\_bear\_upgrade).

The other 3 hinges are same as the hinges on Greg's github repository.

Happy printing :)

Tagi