RAMBo adapter for RAMPS mounting holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In case you have RAMPS mounting holes on a frame but want to mount a RAMBo board in its place instead. Use this and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
In case you have RAMPS mounting holes on a frame but want to mount a RAMBo board in its place instead. Use this and you're set.
Instructions
Print. Mount plastic part using RAMPS holes. Mount RAMBo board. Done.
I made this after seeing the "Sanguinololu adapter for RAMPS mounting holes" by Sound: http://www.thingiverse.com/thing:39893.
NOTE: The RAMBo board has hole spacing of 95mm x 96mm with the 96mm spacing being the length that is parallel to the the USB port direction. ramps-rambo.stl has the RAMPS braces running perpendicular to the USB port. ramps-rambo90.stl has the RAMPS braces running parallel to the USB port. This might be critical for some situations.
Category: 3D Printer Accessories