1 / 2
Wooden train tracks ramps & bridges (IKEA & BRIO compatible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified MichalFanta’s wooden tracks to be ikea compatible
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 347
- Wydruki
- 0
- Wyświetlenia
- 1363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (91)Powiązane
My kid is into ramps and bridges right now. Loved the models from MichalFanta, but had issues with its compatibility with IKEA Lilabo pieces.
Ive modified these files to the correct ramp heights, and changed the connector dimensions to fit better.
Also added an extended version of the truss bridge.
Additional Info on Printing
- I've had good success printing W1,W2 and W10 on its side. Add support enforcers to the connector bits. I would avoid supports near the track areas.
- Otherwise, printing W1, W2 and W10 with tracks facing up works as well, though the curves wont be smooth.
- W4 and W5 need to be printed tracks facing down.
- W6, W7 and W8 print tracks facing up, without supports.
