3D Printer Electronics Enclosure (Pi, MOSFET, PSU, RAMPS, Relay)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix I made for some parts on the printer enclosure by obor. I 'modified' the LCD Bottom part from ZhilDV…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix I made for some parts on the printer enclosure by obor.
I 'modified' the LCD Bottom part from ZhilDV to have holes so you can mount it on the enclosure's frontpanel.
I remixed it so it fits a 12864 RepRap Full Graphic Smart Controller.
You can basically put anything you want in there. It's pretty big.
I included 2 lower front panels.
- with 2 mounts for 30mm fans
- with no mounts but just some airflow holes (I use these with a 120mm fan inside the box)
I also included the original drawing files for if you want to lasercut the sides, top and bottom like I did. I used 2mm acrylic for this.
Category: 3D Printer Parts