Ramps 1.4 + RepRapDiscount Full Graphic Smart Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy SD card access. Commutable button panel for extra buttons. The fan is blow the air back, not into your eye.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 212
- Wydruki
- 1
- Wyświetlenia
- 1279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parameters
Holes
3.5mm
7.00 mm for the bolt head
6.00 mm for the female screw
5.20 mm bottom hexagonal (female screw)
Fan size:
50.20 x 50.20 mm distance between holes mid point
hole size 4.20mm and 6.50 for the bolt head
Commutable button panel for extra buttons
Corner rounded 3.5mm Radius constant
This designed to
RepRapDiscount Full Graphic Smart Controller
https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
https://reprap.org/wiki/RAMPS_1.4
Arduino Mega
I will try to upload soon
- bolt summary
- side panels
- Text me if you want top design, for different fan size
- (screen holder updated, for better printing, without support, done)
Printing
No support needed
For the top try different settings, for nice honeycomb grid