Dust Collection System with Vacmaster VWM510, Sweepy 2.0, and Dust Deputy Low-Pro Plus Cyclone Dust Separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed connections for a Vacmaster VWM510, Sweepy 2.0, & Dust Deputy Low-Pro Plus Cyclone dust collection system
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These 3 parts allow you to create a dust collection system form my Shapeoko CNC using:
Standard 5 gallon bucket
Shop stool (attached the bucket to a stool for proper height)
The three 3D printed parts allow me to connect the different components into a single system.
Attach the standard hose to the vacuum
Connect the standard hose to the dust deputy's using its 2.5" elbow connector and the Vac_to_Dust_Deputy_adapter
Ensure you are using the "To Vacuum" port
Connect the Flex hose to the Dust Deputy inlet using the Flex_hose_to_dust_deputy_adapter.
Not it uses the same twist and lock mechanism as the vacmaster's inlet.
Connect the Flex hose to the Sweepy using the sweepy_to_Flex_hose_adapter.
I printed on my Centauri Carbon using stock print settings (0.2 mm) and normal supports, but tree should be fine). All with the small inlet facing up.