Dust Collection System with Vacmaster VWM510, Sweepy 2.0, and Dust Deputy Low-Pro Plus Cyclone Dust Separator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed connections for a Vacmaster VWM510, Sweepy 2.0, & Dust Deputy Low-Pro Plus Cyclone dust collection system
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
These 3 parts allow you to create a dust collection system form my Shapeoko CNC using:
Standard 5 gallon bucket
Shop stool (attached the bucket to a stool for proper height)
The three 3D printed parts allow me to connect the different components into a single system.
Attach the standard hose to the vacuum
Connect the standard hose to the dust deputy's using its 2.5" elbow connector and the Vac_to_Dust_Deputy_adapter
Ensure you are using the "To Vacuum" port
Connect the Flex hose to the Dust Deputy inlet using the Flex_hose_to_dust_deputy_adapter.
Not it uses the same twist and lock mechanism as the vacmaster's inlet.
Connect the Flex hose to the Sweepy using the sweepy_to_Flex_hose_adapter.
I printed on my Centauri Carbon using stock print settings (0.2 mm) and normal supports, but tree should be fine). All with the small inlet facing up.