Seeed XIAO ESP32S3 Wio-SX1262 Leaf Node for Meshtastic/MeshCore
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leaf shaped case for the ESP32+Wio LoRa module designed to fit with the included PCB antennas and USB-power
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 628
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm using the Seeed Studio XIAO ESP32S3 & Wio-SX1262 Kit for Meshtastic & LoRa as a leaf node (a node at the end of the mesh’s branches) for integration with services like Meshmonitor and Home Assistant. It's a great, minimal node when used in combination with a Client Base node, but I wasn't satisfied with the original case.
I love puns, so naturally the Seeed leaf node had to be shaped like a leaf…
The case is designed to work with just what the node ships with. Two PCB antennas and no battery. You can get going right away!
The model prints with no supports when oriented with the flat sides down.
It can be printed with a multi-material printer or with a single material printer using the "pause-to-change-color" trick or simply leave out the "veins"-STL to get a debossed look instead of the dual-color style. This is all purely cosmetic.
For assembly, I used a single M3x5x4 heat set insert. The lid is then attached to the case with an M3x8 socket head cap screw. I'm sure glue or just friction will work just fine as well. Be careful not to pinch the antenna wires.
Fusion 360 and STEP files included.