Acer Nitro V16S Power Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects your power port and keeps AC Plug from twisting and getting in the way.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This cable clip will protect your power port and keep the plug horizontal.
It also adds some protection incase the cord was yanked on.
Some brief sanding may be necessary for the inside clip where the cord goes. But I'd rather have it tight than lose.
The design is that it won't pop out easily. It's reinforced from side to side of the vent opening. The inside clip locks in the chassis of the laptop. To remove, gently bend up or down. Do not pull straight out or twist.
Print Settings: (I would use a heat resistant filament like ABS or PETG.)
At least 30% infill
Support Enabled at a threshold angle of 9%.
Resolution: 0.2
Warning: Be patient removing the supports. The wings on the clip can snap and there goes your side to side reinforcement.
Let me know if you have any questions or need any tweaks done.
Cheers.