Sea&Sea Motomarine II Shutter Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Probably going for most niche replacement part on this site here. Wanted to share anyway, because repairing is fun.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
For the people wondering: The Sea&Sea Motomarine II is an analog underwater camera. Well made, as far as I can tell, except for the little slider that locks the shutter button.
I needed to repair mine.
Took off the gray cover around the shutter button. That's held on by:
- Glue, toward the backplate
- Glue + peg next to the lock slider
- SCREW!!! Under the rubber grip cover, very easy to miss -.-
My design is somewhat simplified to stand a chance of being printed.
Absolutely needs support.
It's the tiny black plastic part with a screw through it, visible in the second image.
Mine had a hairline fracture, disabling the ratcheting.
Put a drop of Acetone on it, some pressure, waited 12 hours, install, curse, take out, heat gently with hot air (okay, I held it next to a lighter flame...), bend into shape, install. For now it works.
So this design is an untested hail-mary for if and when the original part snaps completely.
Mostly uploading to document the repair process, because all I found in regards to fixing this thing was a several years old reddit thread of two people discussing that their cameras needed repair.