Sea&Sea Motomarine II Shutter Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Probably going for most niche replacement part on this site here. Wanted to share anyway, because repairing is fun.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
For the people wondering: The Sea&Sea Motomarine II is an analog underwater camera. Well made, as far as I can tell, except for the little slider that locks the shutter button.
I needed to repair mine.
Took off the gray cover around the shutter button. That's held on by:
- Glue, toward the backplate
- Glue + peg next to the lock slider
- SCREW!!! Under the rubber grip cover, very easy to miss -.-
My design is somewhat simplified to stand a chance of being printed.
Absolutely needs support.
It's the tiny black plastic part with a screw through it, visible in the second image.
Mine had a hairline fracture, disabling the ratcheting.
Put a drop of Acetone on it, some pressure, waited 12 hours, install, curse, take out, heat gently with hot air (okay, I held it next to a lighter flame...), bend into shape, install. For now it works.
So this design is an untested hail-mary for if and when the original part snaps completely.
Mostly uploading to document the repair process, because all I found in regards to fixing this thing was a several years old reddit thread of two people discussing that their cameras needed repair.