Siegmund Fixture Table Clamp Soft Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When working with soft or pre-finished material, it is advantageous to use soft caps for fixture table clamps.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
In the lab, we have a Siegmund System 16 Fixture Table and I wanted to create soft caps for the clamps. These are designed to be printed in TPU and snap fit over the clamp foot easily but stay on when not in use. I have also included caps for Siegmund System 28 clamps, which have a foot diameter of 40mm. These parts benefit from “Sequential Printing” and you should be able to fit at least 6 caps on a build plate of a MK3S+ at a time. This is a pretty niche solution but someone out there might find it useful!