Square Tool,Easy to print,No support needed,Kątownik ślusarski ze stopką,Anschlagwinkel mit Fuß
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
engineer's square with base. Easy to print
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple and practical square tool with a base, designed for workshop, DIY, woodworking, metalworking, and model-making applications.
The tool can be easily assembled using standard M4 hardware and provides a convenient way to check and maintain accurate 90-degree angles during work.
Required hardware:
• 2× M4 × 12 mm screws
• 2× M4 nuts (7 mm outer diameter)
Printing recommendations:
• Infill: Gyroid
• Infill percentage: As required for your application and desired strength
For the best strength-to-weight ratio, Gyroid infill is recommended. The infill percentage can be adjusted depending on the intended use and required durability.
The model is designed for easy 3D printing and requires no supports.
If you find this model useful, please leave a rating and share a photo of your print.
ENJOY