WiFi Access Point Holder - 2DoF Holder Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Ubiquiti WiFi Access Point Lite - or any other dish in size of 160mm and 62mm pitch of mounting holes.There…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Holder for Ubiquiti WiFi Access Point Lite - or any other dish in size of 160mm and 62mm pitch of mounting holes.
There are two degrees of freedom (2 DoF) for positioning the AP: it rotates around Z axis and also tilts up and down.
While tilting is fixed in place with a Nut, rotation is only positioned througfh gears and gravity. This allows for really quick adjustment and also quick temporary displacement in case some work needs to be done behind the AP.
Cable duct with leads for cable straps on top of the arm plus a hole through central peg that will allow for RJ45 connector to be pushed through to organize Ethernet cable installation.
I've printed with PETG and 0.3 layer resulting in perfectly working thread and nut - but any material and setting will do... (I assume).
Category: Household