1 / 6
WiFi Access Point Holder - 2DoF Holder Arm — image 1
1 / 6

WiFi Access Point Holder - 2DoF Holder Arm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for Ubiquiti WiFi Access Point Lite - or any other dish in size of 160mm and 62mm pitch of mounting holes.There…

Rating
0 / 5
Likes
3
Downloads
8
Makes
0
Views
56
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Holder for Ubiquiti WiFi Access Point Lite - or any other dish in size of 160mm and 62mm pitch of mounting holes.

There are two degrees of freedom (2 DoF) for positioning the AP: it rotates around Z axis and also tilts up and down.

While tilting is fixed in place with a Nut, rotation is only positioned througfh gears and gravity. This allows for really quick adjustment and also quick temporary displacement in case some work needs to be done behind the AP.

Cable duct with leads for cable straps on top of the arm plus a hole through central peg that will allow for RJ45 connector to be pushed through to organize Ethernet cable installation.

I've printed with PETG and 0.3 layer resulting in perfectly working thread and nut - but any material and setting will do... (I assume).

Category: Household

Tags