A "Y" connector bracket for garden hoses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to hold a 2 way hose splitter in place. The lower block is tapered to force a tight fit into the bracket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A "Y" connector bracket for garden hoses. A bracket to hold a 2 way hose splitter in place. The lower block is tapered to force a tight fit into the bracket. Attach the main body first and then place the block up against the fitting and screw in place. I always use pilot holes when fastening to wood. Be sure not to tighten the screws too much as to crack the plastic.
I used ABS for this outside project choosing strength profiles.
This was made to fit a common brand I had (see photos) but may not suit all types of splitters.